水草情迷

無錯

據A 君高手教學我收料 S 大大 等高人都係放在入水口的

_________________
你一天中僅有這麼多個小時，你只能在這個時間內努力工作，那麼為甚麼為錢而拚命工作呢？是不是應該學會讓錢和別人為你工作？這樣你才能夠自由自在地去做其他重要的事情。

如果放係入水位.. 咁將玻璃細化器放係入水位都有相同效果啦..

我的溶解器用o左兩個月就塞o左.
同Ah Ken 個情況一樣.
Any 高人前輩可以幫幫小弟.
溶解器同Warsur 個係一樣是內接.
Thx.


Ken Said:
我都用過此co2溶解器(於e-shop van 到買,外表同你第一個post的一樣),的確溶解更有效率及可以節省co2用量,外接時又可美觀及鏘位,缺點為當co2關左時水會慢慢滲入co2果層,令到內層生銹而減低效率,加上又不能清洗.另外此co2溶解器需要用更大的氣壓才能令co2穿透"滲透層"進入水中,令我有兩個BioPlast的膠計泡器先後因承受不住而爆左,(我用BioPlast溶解器細錶set 0.3-0.4 bar,而用該co2溶解器則為 2 bar以上才可以有每秒1泡)
以上為本人使用的經歷,僅供參考.

Same problem as ghlanlee兄, I have discussed this problem with ghlanlee兄, it seems that this is the problem of the quality of steel plate of the inner side. The one that I am using is ok. If you dear to try, buy another one.

My recent report on this 溶解器 (after half-year usage):

1. I recently found that this 溶解器 塞o左. I therefore use 漂白水浸下 溶解器 and use 針筒 to fill the inside with 漂白水. Then also use the 針筒 to pump the 漂白水 out and clean the whole 溶解器. No more blockage. !!!!

2. I did not find any 生銹.

I've seen it before at the Aquastore (=Kwun Tong 10/F) and the link is
"http://www.aquastore.com.hk/details.php?productid=340"

Yes.......I know, I also bought one more for spare.