水草情迷

我作天晚10時釵菬謅F一樽DIY CO2, 但到今晚放工回家發現完全沒有氣出. 請各高手指教.我的用料如下: 2 litre plastic bottle, 6 glass of warm water, 2 glass of sugar and 1/2 teaspoon of yeast. 竹筷子作細化器.

If you ensure that the pipe connected perfectly, what you can do is wait only.

Maybe u can check any leakage from all the joint area.
Did u see any bubble generated inside the bottle? If yes, and no leakage. It should ok.
If no, there may be something wrong.

yes, there's a little bubble inside the bottle and no leakage is found, but just no co2 goes inside the tank after almost 24 hours. Disappointed!

Is the bottle is expanded. And feel hard to push inward?If yes, it is normal.
Then, u can try to remove the 竹筷子 and put the tubule directly into the water. See any bubble come out. If yes, u success. Connect the 竹筷子 again and wait.
In my first time experience, I wait for 2 day even no CO2 come out. Lastly, I found that there is leakage in the joint area after I put the joint into the water for leakage test.

有氣出喇!經smallpotato兄提醒,再測試個可調教的t-joint,果然發現漏氣,立即換了一根膠管連接,不到五分,竹筷子咀便有氣出.那個可調教的t-joint是新買的,完全無過它會漏氣,花了我多天時間,真激氣.