水草情迷

請問問大家既意見, 想買個40"x18"18"既缸養草,但係擺魚缸既鞋櫃得16"深,就咁擺上去会唔会好危險? 突出咗兩吋,我想用2"既鋁角加深鞋櫃唔知夠唔夠力,我又唔想訂造,因要成兩個禮拜先有! thx! 另外想問開缸5寳魚街边度買到,今日行咗兩轉都揾唔到!

_________________
40x18x18
DIY Led Q5Wx30 (1100-1700 hrs) by Brother Sun
CO2 4 bubbles per sec
2217>Hailer 250a(26度) 2217>9W uv

突出咗兩吋
Yes, 好危險
- the base will break as the water is very heavy
- the tank will fall forward

我想用2"既鋁角加深鞋櫃唔知夠唔夠力
- No, 鞋櫃 usually use med to low density fiber wood which is easily bending. U need the high density one

我又唔想訂造,因要成兩個禮拜先有! thx! 另外想問開缸5寳魚街边度買到,今日行咗兩轉都揾唔到!
- the the mass production 魚缸 is only up to 3-4 feet
- U need to order the 5 feet 魚缸 except the shop sells the display one

如果加塊木板lung底会唔会穩陣呢?

_________________
40x18x18
DIY Led Q5Wx30 (1100-1700 hrs) by Brother Sun
CO2 4 bubbles per sec
2217>Hailer 250a(26度) 2217>9W uv

如果加塊木板lung底会唔会穩陣呢?
Yes, could be, but suggest at least 3/4 inch or even thicker solid wood. U can order it in the wood shop.

Your idea is ok but need a lot of DIY. The key point is that the turning force (moving forward is strong) as the upper part is bigger than the lower part.

- U need to check the loading capacity of your 鞋櫃
- U need to fix the whole 鞋櫃 to wall + metal hanger to fix the fish tank

Wait for your completed photos

如果又將塊板放中間,前後突出鞋櫃1吋,咁個鱼缸d力会唔会平均d呢?

_________________
40x18x18
DIY Led Q5Wx30 (1100-1700 hrs) by Brother Sun
CO2 4 bubbles per sec
2217>Hailer 250a(26度) 2217>9W uv

千其唔好放係鞋櫃上面呀!!!
鞋櫃既結構唔係比你放重物係上面架...
你個缸既size連水既重量超過500磅喎
又上重下輕,好容易反架,風險極大
唔好試呀.....諗清楚的

我個鞋櫃係訂造成54"長实木,之前都擺過36"缸都無問題既, thx!

_________________
40x18x18
DIY Led Q5Wx30 (1100-1700 hrs) by Brother Sun
CO2 4 bubbles per sec
2217>Hailer 250a(26度) 2217>9W uv

哦!!!原來係定做既
如果你係挨牆放咁都唔怕既!!!

=> Yes, 咁個鱼缸d力会平均d呢. But not suggested as U cannot fix the 鞋櫃 to wall將塊板放中間